|
|
|
|
|
|
Redding Reloading 92244 7.7MM x 58 Jap Seating Die
|
List Price: $64.50
Our Price: $52.93
You Save $11.57!
|
|
|
The seating die includes bullet guide, built-in crimping ring and the proper seating plug.
|
|
|
|
|
|
|
|
|
|
|
|
|
RCBS 10701 Full Length Die 220 Swift
|
|
Our Price: $43.20
|
|
|
The classic dies that started it all continue to set industry standards. RCBS Precision dies are RCBS Precisioneered to deliver superior performance plus easy adjustment and operation, whether you reload 10 or 10,000 cartridges a year.
220 Swift
Sets Feature:
Sizing dies with tolerance twice as stringent as typical firearms and ammunition for consistent chambering round after round.
Fine body knurling for easy, non-slip adjustment
Hardened die bodies
Easy, adjustable expander-decapping unit locks in place, eliminating slippage
Three-piece expander/decapping unit lets you replace the decapping pin in a snap
|
|
|
|
|
|
|
|
|
|
|
|
|
Hornady 546583 Series II Three Die Set 460S&W
|
List Price: $85.01
Our Price: $76.57
You Save $8.44!
|
|
|
Custom-Grade rifle dies begin as specially selected steel that's hand-inspected both before and after it's delivered. The steel is then heat-treated to ensure the durability needed to provide a lifetime of reloading. Then the inside surface of each sizing die is carefully hand-polished to a mirror finish. The result is a die so smooth, guaranteed to never scratch a case. Before assembly, every part of every die is hand-inspected and a protective coating is applied to prevent moisture damage during shipping. The result is the most advanced reloading die set available today.
Elliptical Expander significantly reduces the friction and case-neck stretch associated with other expanders. It threads on so it can't pull loose and eliminates the need for a separate expander die for "necking up" to the next larger caliber. Sliding, In-Line Seating System assures in-line benchrest alignment of every bullet seated. The sliding sleeve vertically pre-aligns the bullet with the case-neck as they enter the die body. As the cartridge is raised, the bullet contacts the floating steel seating stem and is kept in perfect alignment as it's being seated.
Every Custom-Grade New Dimension die set comes in a convenient box which lets you store fully adjusted dies, Lock-N-Load bushings, shell holders and a taper crimp die. Wrench flats located on the die body make adjustments much easier and eliminate damage from adjusting dies with pliers. Spindle lock design aligns the expander spindle to perfectly center itself in the die. Provides tight tolerances and precise fit. Expander spindle improves alignment and enhances accuracy for smoother operation. A solid, one-piece rod guaranteed not to bend or break. Hardened-steel decap pin will not break, bend or crack, even when depriming cases with crimped primer pockets. Elliptical expander significantly reduces friction and case-neck stretch. Threaded and replaceable. Expander die flares the mouth of the case preparing it to receive a bullet. Precision ground and polished. Seater adjustment screw easily adjusts for bullet seating depths.
All-steel construction provides added strength and reduces thread wear. In-line bullet seating system includes a floating bullet alignment sleeve, floating steel seating stem and a built-in crimper for benchrest precision when seating bullets. Bullet seater alignment sleeve guides the bullet and case-neck into the die. The free-floating sleeve design assures benchrest alignment every time. Floating steel seating stem assures consistent alignment with a universal design that better seats more bullet profiles. Built-in crimper gives you the option of crimping without an extra crimp die. Sure-Loc lock rings lock the die into position and provide precise adjustment. Locking screws stay free from threads. Features wrench flats. Locking retainer spring removes in seconds for easy disassembly and cleaning of the die.
|
|
|
|
|
|
|
|
|
|
|
|
|
Hornady 044090 MicroJust Seating Stem
|
|
Our Price: $33.11
|
|
|
You can add the Hornady MicroJust Seating Stem to any New Dimension seating die. Now there's no need to buy an expensive calibrated seating die. The Hornady MicroJust micrometer-style Seating Stem is the economical way to achieve optimum bullet seating depth for benchrest accuracy and consistency. Simply replace the standard seating depth adjustment stem with the MicroJust Seating Stem. The MicroJust stem allows you to precisely set bullet seating depth in .001 of an inch increments. All-steel construction.
|
|
|
|
|
|
|
|
|
|
|
|
|
Hornady 060008 Decapping Pin-Large 6-pk
|
|
Our Price: $8.69
|
|
|
The replaceable headed decap pin is specially machined from hardened select steel.
|
|
|
|
|
|
|
|
|
|
|
|
|
RCBS 11101 Series A Full-Length Die 223 Rem
|
|
Our Price: $43.20
|
|
|
The classic dies that started it all continue to set industry standards. RCBS Precision dies are RCBS Precisioneered to deliver superior performance plus easy adjustment and operation, whether you reload 10 or 10,000 cartridges a year.
223 Remington
Sets Feature:
Sizing dies with tolerance twice as stringent as typical firearms and ammunition for consistent chambering round after round.
Fine body knurling for easy, non-slip adjustment
Hardened die bodies
Easy, adjustable expander-decapping unit locks in place, eliminating slippage
Three-piece expander/decapping unit lets you replace the decapping pin in a snap
|
|
|
|
|
|
|
|
|
|
|
|
|
RCBS 13503 Series A Small-Base Die .270
|
|
Our Price: $45.76
|
|
|
The classic dies that started it all continue to set industry standards. RCBS Precision dies are RCBS Precisioneered to deliver superior performance plus easy adjustment and operation, whether you reload 10 or 10,000 cartridges a year.
.270
Sets Feature:
Sizing dies with tolerance twice as stringent as typical firearms and ammunition for consistent chambering round after round.
Fine body knurling for easy, non-slip adjustment
Hardened die bodies
Easy, adjustable expander-decapping unit locks in place, eliminating slippage
Three-piece expander/decapping unit lets you replace the decapping pin in a snap
|
|
|
|
|
|
|
|
|
|
|
|
|
Hornady C1000 LNL OAL Gauge Straight
|
|
Our Price: $42.01
|
|
|
Precisely regulating the bullet seating depth and the resulting "jump" to the rifling is widely regarded as fundamental to improved accuracy. A few thousandths of an inch change between the bullet and the rifling can make the difference between just so-so accuracy and real tack-driver performance. The OAL Gauge is universally acclaimed as the most accurate, easy-to-use, and reliable method of obtaining that critical relationship.
To use the OAL Gauge you will need to purchase a Modified Case to fit your firearm's chamber and thread it onto the Gauge. Stoney Point offers interchangeable Modified Cases in all common sizes from .17 Remington up to and including .45 Government. These specially prepared Modified Cases are threaded at the case-head and have a .002" oversized neck to accept the same bullets you intend to load. This is critical - as the OAL Gauge dimensions obtained will be accurate to .001". Results such as this cannot be attained with competitive products which use a simulated bullet with an arbitrary shape.
The OAL Gauge has a lightweight bullet push-rod, molded from tough glass-filled nylon. It provides improved sensitivity and position-holding reliability. It will also fit prior model (straight) OAL Gauges, for an easy upgrade.
C-1000 Straight Model: For all bolt action and single-shot firearms, or any firearm with straight-line access to the chamber. This model is preferred, as it is most precise and user friendly.
|
|
|
|
|
|
|
|
|
|
|
|
|
Hornady HK66 LNL Headspace Kit w/Body
|
List Price: $47.17
Our Price: $45.99
You Save $1.18!
|
|
|
Headspace Set Kit (Includes Comparator Body and Five Bushings)
The Head 'n Shoulders gauge is the best method to extend brass life, improve accuracy, and enhance safety. The gauge measures variations in your brass before and after firing, or re-sizing. It allows comparison between fire-formed brass and your re-sized brass. Any of five interchangeable bushings (included) are attached to your caliper using the same B-2000 body (included) as found on our Bullet Comparator.
After attaching to your caliper with the brass thumbscrew, simply select the proper bushing (see chart below) to measure your cases from the case-head to the datum line on the case shoulder. Typically, when full-length re-sizing, the die should be adjusted to set the shoulder back .001" to .002". This will provide a proper (minimal) clearance with the firearm's chamber. A proper headspace will minimize case stretching, reduce work hardening, extend case life, improve accuracy, and increase safety.
For the shooter with an autoloader, check your fired cases by rotating the brass in the Head 'n Shoulders Gauge to identify cases with bent rims - a certain cause of "flyers". You can also identify excessive headspace conditions, which is a potentially dangerous situation. Proper headspace also provides proper firing pin contact with the primer to improve the reliability of your loads.
Bushing Size Chart:
A .330" - .17 Rem, .222 Rem, .222 Rem Mag, .223 Rem, .220 Swift, .221 Rem FB,
B .350" - 22 PPC, 22/250 Rem, 6 PPC, 6 BR Rem, 250 SAV, 7 BR Rem, 7x30 Waters, 22 BR Rem
C .375" - 6mm Rem, 257 ROB, 25/06 Rem, 270 WIN, 7x57mm MAUSER, 280 Rem, 30/30 WIN, 30/06 SPFLD, 7.62x39 RUSSIAN, 303 BRIT, 300 H&H MAG, 30-40 KRAG, 22 CHEETAH
D .400" - 243 WIN, 7mm/08 Rem, 308 WIN, 7mm STE
E .420" - 284 WIN, 7mm Rem MAG, 300 WIN MAG, 8mm Rem MAG, 338 WIN MAG, 375 H&H, 7mm STW
|
|
|
|
|
|
|
|
|
|
|
|
|
RCBS 22115 Series B 3-Die Carbide Taper 40S
|
|
Our Price: $58.16
|
|
|
The classic dies that started it all continue to set industry standards. RCBS Precision dies are RCBS Precisioneered to deliver superior performance plus easy adjustment and operation, whether you reload 10 or 10,000 cartridges a year.
40 S&W/10mm
Sets Feature:
Sizing dies with tolerance twice as stringent as typical firearms and ammunition for consistent chambering round after round.
Fine body knurling for easy, non-slip adjustment
Hardened die bodies
Easy, adjustable expander-decapping unit locks in place, eliminating slippage
Three-piece expander/decapping unit lets you replace the decapping pin in a snap
|
|
|
|
|
|
|
|
|
|
|
|
|
Redding Reloading 80350 450 Marlin Three Die Set
|
List Price: $102.00
Our Price: $71.23
You Save $30.77!
|
|
|
Die sets for straight wall cases contain three dies. This is necessary because it is not possible to full length resize straight wall cases and expand the neck for proper bullet fit in one operation. The full length resizing die contains a decapping rod assembly. The expander die contains a neck expanding plug. The seating die includes bullet guide, built-in crimping ring and the proper seating plug. Seating die comes with roll crimp.
|
|
|
|
|
|
|
|
|
|
|
|
|
Hornady 546382 Series I Two Die Set 8mm Mauser
|
|
Our Price: $45.48
|
|
|
Custom-Grade rifle dies begin as specially selected steel that's hand-inspected both before and after it's delivered. The steel is then heat-treated to ensure the durability needed to provide a lifetime of reloading. Then the inside surface of each sizing die is carefully hand-polished to a mirror finish. The result is a die so smooth, guaranteed to never scratch a case. Before assembly, every part of every die is hand-inspected and a protective coating is applied to prevent moisture damage during shipping. The result is the most advanced reloading die set available today.
Elliptical Expander significantly reduces the friction and case-neck stretch associated with other expanders. It threads on so it can't pull loose and eliminates the need for a separate expander die for "necking up" to the next larger caliber. Sliding, In-Line Seating System assures in-line benchrest alignment of every bullet seated. The sliding sleeve vertically pre-aligns the bullet with the case-neck as they enter the die body. As the cartridge is raised, the bullet contacts the floating steel seating stem and is kept in perfect alignment as it's being seated.
Every Custom-Grade New Dimension die set comes in a convenient box which lets you store fully adjusted dies, Lock-N-Load bushings, shell holders and a taper crimp die. Wrench flats located on the die body make adjustments much easier and eliminate damage from adjusting dies with pliers. Spindle lock design aligns the expander spindle to perfectly center itself in the die. Provides tight tolerances and precise fit. Expander spindle improves alignment and enhances accuracy for smoother operation. A solid, one-piece rod guaranteed not to bend or break. Hardened-steel decap pin will not break, bend or crack, even when depriming cases with crimped primer pockets. Elliptical expander significantly reduces friction and case-neck stretch. Threaded and replaceable. Expander die flares the mouth of the case preparing it to receive a bullet. Precision ground and polished. Seater adjustment screw easily adjusts for bullet seating depths.
All-steel construction provides added strength and reduces thread wear. In-line bullet seating system includes a floating bullet alignment sleeve, floating steel seating stem and a built-in crimper for benchrest precision when seating bullets. Bullet seater alignment sleeve guides the bullet and case-neck into the die. The free-floating sleeve design assures benchrest alignment every time. Floating steel seating stem assures consistent alignment with a universal design that better seats more bullet profiles. Built-in crimper gives you the option of crimping without an extra crimp die. Sure-Loc lock rings lock the die into position and provide precise adjustment. Locking screws stay free from threads. Features wrench flats. Locking retainer spring removes in seconds for easy disassembly and cleaning of the die.
|
|
|
|
|
|
|
|
|
|
|
|
|
Redding Reloading 21022 Redding/Imperial Sizing Die Wax
|
|
Our Price: $10.08
|
|
|
The original non-liquid sizing die lube. Packaged in 1 oz tins.
|
|
|
|
|
|
|
|
|
|
|
|
|
Redding Reloading 58106 22-250 Remington Competition Set
|
List Price: $283.50
Our Price: $179.74
You Save $103.76!
|
|
|
The Redding Competition Neck Sizing Die with interchangeable bushings brings an advanced level of precision to Competition Shooters. Similar in design concept to the Competition Seating Die, the cartridge case is completely supported and aligned with the sizing bushing before the sizing process begins. As the sizing process starts, the cartridge case remains supported in the tightly chambered, sliding sleeve as it moves upward while the resizing bushing self-centers on the case neck. The decapping rod is maintained in precise alignment by using the internal parts of the die as a linear support much like that of a firing pin. Meanwhile, the micrometer adjustment of the bushing position delivers precise control to the desired amount of neck length to be sized.
|
|
|
|
|
|
|
|
|
|
|
|
|
Redding Reloading 80244 7.7MM x 58 Jap FL Die Set
|
List Price: $114.60
Our Price: $66.58
You Save $48.02!
|
|
|
Redding Series C 2-Die Sets (7.7mmx58 Jap) - #80244
Full length die sets for bottleneck cases contain two dies. The full length resizing die contains a decapping rod assembly with a neck expander. The seating die includes bullet guide, built-in crimping ring and the proper seating plug.
Contains:
- Full length sizing die (#91244)
- Seating Die (#92244)
- Decap rod assembly (#24310)
- Size button (#41310)
|
|
|
|
|
|
|
|
|
|
|
|
|
Redding Reloading 80191 45 Colt/454 Casull Three Die Set
|
List Price: $57.00
Our Price: $45.10
You Save $11.90!
|
|
|
Die sets for straight wall cases contain three dies. This is necessary because it is not possible to full length resize straight wall cases and expand the neck for proper bullet fit in one operation. The full length resizing die contains a decapping rod assembly. The expander die contains a neck expanding plug. The seating die includes bullet guide, built-in crimping ring and the proper seating plug. Seating die comes with roll crimp.
|
|
|
|
|
|
|
|
|
|
|
|
|
Redding Reloading 80243 7.65MM x 53 Mauser FL Die Set
|
List Price: $114.60
Our Price: $78.92
You Save $35.68!
|
|
|
Redding Series C 2-Die Sets (7.65mmx53 Mauser; Belgian) - #80243
Full length die sets for bottleneck cases contain two dies. The full length resizing die contains a decapping rod assembly with a neck expander. The seating die includes bullet guide, built-in crimping ring and the proper seating plug.
Contains:
- Full length sizing die (#91243)
- Seating Die (#92243)
- Decap rod assembly (#23310)
- Size button (#41310)
|
|
|
|
|
|
|
|
|
|
|
|
|
Redding Reloading 80415 6.5MM/284 Win Full Length Die Set
|
List Price: $85.50
Our Price: $64.05
You Save $21.45!
|
|
|
Redding Series D 2-Die Sets (6.5mm/284 Winchester) - #80415
Full length die sets for bottleneck cases contain two dies. The full length resizing die contains a decapping rod assembly with a neck expander. The seating die includes bullet guide, built-in crimping ring and the proper seating plug.
Contains:
- Full length sizing die (#91415)
- Seating Die (#92415)
- Decap rod assembly (#34263)
- Size button (#42263)
|
|
|
|
|
|
|
|
|
|
|
|
|
Redding Reloading 84223 300 WSM Deluxe Die Set
|
List Price: $100.20
Our Price: $73.18
You Save $27.02!
|
|
|
Deluxe die sets for bottleneck cases contain three dies. The full length resizing die contains a decapping rod assembly with a neck expander. The seating die includes bullet guide, built-in crimping ring and the proper seating plug. Also includes a neck sizing die.
Contains:
- Full length sizing die
- Seating Die
- Neck Sizing Die
- Decap rod assembly
- Size button
|
|
|
|
|
|
|
|
|
|
|
|
|
Redding Reloading 80233 256 Win Mag Full Length Die Set
|
List Price: $85.50
Our Price: $64.05
You Save $21.45!
|
|
|
Redding Series B 2-Die Sets (256 Winchester Magnum) - #80233
Full length die sets for bottleneck cases contain two dies. The full length resizing die contains a decapping rod assembly with a neck expander. The seating die includes bullet guide, built-in crimping ring and the proper seating plug.
Contains:
- Full length sizing die (#91233)
- Seating Die (#92233)
- Decap rod assembly (#32956)
- Size button (#39256)
|
|
|
|
|
|
|
|
|
|
|
|
|
MTM LT150M-30 Large Universal Loading Tray-Red
|
|
Our Price: $12.81
|
|
|
In keeping time with the shooting industry, the two-sided Universal Loading Tray is now retooled for the 21st century. Don't worry, it still accommodates shooters loading traditional rifle calibers from .17 to 348 Win and pistol cartridges in 9mm, .38 and .45 calibers. The LT-150M also includes today's "fatter calibers," like WSM, WSSM, Remington Ultra Mag and 500 S&W.
|
|
|
|
|
|
|
|
|
|
|
|
|
RCBS 13301 Ser A Full Lngth Die St 6.8RemSPC
|
|
Our Price: $43.20
|
|
|
The classic dies that started it all continue to set industry standards. RCBS Precision dies are RCBS Precisioneered to deliver superior performance plus easy adjustment and operation, whether you reload 10 or 10,000 cartridges a year.
6.8 Remington SPC
Sets Feature:
Sizing dies with tolerance twice as stringent as typical firearms and ammunition for consistent chambering round after round.
Fine body knurling for easy, non-slip adjustment
Hardened die bodies
Easy, adjustable expander-decapping unit locks in place, eliminating slippage
Three-piece expander/decapping unit lets you replace the decapping pin in a snap
|
|
|
|
|
|
|
|
|
|
|
|
|
Redding Reloading 86208 458 Win Mag Profile Crimp Die
|
List Price: $38.40
Our Price: $34.52
You Save $3.88!
|
|
|
For handgun cartridges which do not headspace on the case mouth. These dies are not for everyone!-They were designed for those who want the best possible crimp. Profile crimp dies provide a tighter, more uniform roll type crimp, and requires the bullet to be seated to the correct depth in a previous operation.
|
|
|
|
|
|
|
|
|
|
|
|
|
Hornady 546566 Series II 3 Die Rifle 45/70 Govt
|
List Price: $51.91
Our Price: $51.44
You Save $0.47!
|
|
|
Custom-Grade rifle dies begin as specially selected steel that's hand-inspected both before and after it's delivered. The steel is then heat-treated to ensure the durability needed to provide a lifetime of reloading. Then the inside surface of each sizing die is carefully hand-polished to a mirror finish. The result is a die so smooth, guaranteed to never scratch a case. Before assembly, every part of every die is hand-inspected and a protective coating is applied to prevent moisture damage during shipping. The result is the most advanced reloading die set available today.
Elliptical Expander significantly reduces the friction and case-neck stretch associated with other expanders. It threads on so it can't pull loose and eliminates the need for a separate expander die for "necking up" to the next larger caliber. Sliding, In-Line Seating System assures in-line benchrest alignment of every bullet seated. The sliding sleeve vertically pre-aligns the bullet with the case-neck as they enter the die body. As the cartridge is raised, the bullet contacts the floating steel seating stem and is kept in perfect alignment as it's being seated.
Every Custom-Grade New Dimension die set comes in a convenient box which lets you store fully adjusted dies, Lock-N-Load bushings, shell holders and a taper crimp die. Wrench flats located on the die body make adjustments much easier and eliminate damage from adjusting dies with pliers. Spindle lock design aligns the expander spindle to perfectly center itself in the die. Provides tight tolerances and precise fit. Expander spindle improves alignment and enhances accuracy for smoother operation. A solid, one-piece rod guaranteed not to bend or break. Hardened-steel decap pin will not break, bend or crack, even when depriming cases with crimped primer pockets. Elliptical expander significantly reduces friction and case-neck stretch. Threaded and replaceable. Expander die flares the mouth of the case preparing it to receive a bullet. Precision ground and polished. Seater adjustment screw easily adjusts for bullet seating depths.
All-steel construction provides added strength and reduces thread wear. In-line bullet seating system includes a floating bullet alignment sleeve, floating steel seating stem and a built-in crimper for benchrest precision when seating bullets. Bullet seater alignment sleeve guides the bullet and case-neck into the die. The free-floating sleeve design assures benchrest alignment every time. Floating steel seating stem assures consistent alignment with a universal design that better seats more bullet profiles. Built-in crimper gives you the option of crimping without an extra crimp die. Sure-Loc lock rings lock the die into position and provide precise adjustment. Locking screws stay free from threads. Features wrench flats. Locking retainer spring removes in seconds for easy disassembly and cleaning of the die.
|
|
|
|
|
|
|
|
|
|
|
|
|
Hornady 546425 Series II 3 Die Rifle 405 Win
|
List Price: $51.91
Our Price: $51.44
You Save $0.47!
|
|
|
Custom-Grade rifle dies begin as specially selected steel that's hand-inspected both before and after it's delivered. The steel is then heat-treated to ensure the durability needed to provide a lifetime of reloading. Then the inside surface of each sizing die is carefully hand-polished to a mirror finish. The result is a die so smooth, guaranteed to never scratch a case. Before assembly, every part of every die is hand-inspected and a protective coating is applied to prevent moisture damage during shipping. The result is the most advanced reloading die set available today.
Elliptical Expander significantly reduces the friction and case-neck stretch associated with other expanders. It threads on so it can't pull loose and eliminates the need for a separate expander die for "necking up" to the next larger caliber. Sliding, In-Line Seating System assures in-line benchrest alignment of every bullet seated. The sliding sleeve vertically pre-aligns the bullet with the case-neck as they enter the die body. As the cartridge is raised, the bullet contacts the floating steel seating stem and is kept in perfect alignment as it's being seated.
Every Custom-Grade New Dimension die set comes in a convenient box which lets you store fully adjusted dies, Lock-N-Load bushings, shell holders and a taper crimp die. Wrench flats located on the die body make adjustments much easier and eliminate damage from adjusting dies with pliers. Spindle lock design aligns the expander spindle to perfectly center itself in the die. Provides tight tolerances and precise fit. Expander spindle improves alignment and enhances accuracy for smoother operation. A solid, one-piece rod guaranteed not to bend or break. Hardened-steel decap pin will not break, bend or crack, even when depriming cases with crimped primer pockets. Elliptical expander significantly reduces friction and case-neck stretch. Threaded and replaceable. Expander die flares the mouth of the case preparing it to receive a bullet. Precision ground and polished. Seater adjustment screw easily adjusts for bullet seating depths.
All-steel construction provides added strength and reduces thread wear. In-line bullet seating system includes a floating bullet alignment sleeve, floating steel seating stem and a built-in crimper for benchrest precision when seating bullets. Bullet seater alignment sleeve guides the bullet and case-neck into the die. The free-floating sleeve design assures benchrest alignment every time. Floating steel seating stem assures consistent alignment with a universal design that better seats more bullet profiles. Built-in crimper gives you the option of crimping without an extra crimp die. Sure-Loc lock rings lock the die into position and provide precise adjustment. Locking screws stay free from threads. Features wrench flats. Locking retainer spring removes in seconds for easy disassembly and cleaning of the die.
|
|
|
|
|
|
|
|
|
|
|
|
|
Hornady 546299 Series III 2 Die Rifle 6.8mmRmSPC
|
List Price: $51.91
Our Price: $51.44
You Save $0.47!
|
|
|
Custom-Grade rifle dies begin as specially selected steel that's hand-inspected both before and after it's delivered. The steel is then heat-treated to ensure the durability needed to provide a lifetime of reloading. Then the inside surface of each sizing die is carefully hand-polished to a mirror finish. The result is a die so smooth, guaranteed to never scratch a case. Before assembly, every part of every die is hand-inspected and a protective coating is applied to prevent moisture damage during shipping. The result is the most advanced reloading die set available today.
Elliptical Expander significantly reduces the friction and case-neck stretch associated with other expanders. It threads on so it can't pull loose and eliminates the need for a separate expander die for "necking up" to the next larger caliber. Sliding, In-Line Seating System assures in-line benchrest alignment of every bullet seated. The sliding sleeve vertically pre-aligns the bullet with the case-neck as they enter the die body. As the cartridge is raised, the bullet contacts the floating steel seating stem and is kept in perfect alignment as it's being seated.
Every Custom-Grade New Dimension die set comes in a convenient box which lets you store fully adjusted dies, Lock-N-Load bushings, shell holders and a taper crimp die. Wrench flats located on the die body make adjustments much easier and eliminate damage from adjusting dies with pliers. Spindle lock design aligns the expander spindle to perfectly center itself in the die. Provides tight tolerances and precise fit. Expander spindle improves alignment and enhances accuracy for smoother operation. A solid, one-piece rod guaranteed not to bend or break. Hardened-steel decap pin will not break, bend or crack, even when depriming cases with crimped primer pockets. Elliptical expander significantly reduces friction and case-neck stretch. Threaded and replaceable. Expander die flares the mouth of the case preparing it to receive a bullet. Precision ground and polished. Seater adjustment screw easily adjusts for bullet seating depths.
All-steel construction provides added strength and reduces thread wear. In-line bullet seating system includes a floating bullet alignment sleeve, floating steel seating stem and a built-in crimper for benchrest precision when seating bullets. Bullet seater alignment sleeve guides the bullet and case-neck into the die. The free-floating sleeve design assures benchrest alignment every time. Floating steel seating stem assures consistent alignment with a universal design that better seats more bullet profiles. Built-in crimper gives you the option of crimping without an extra crimp die. Sure-Loc lock rings lock the die into position and provide precise adjustment. Locking screws stay free from threads. Features wrench flats. Locking retainer spring removes in seconds for easy disassembly and cleaning of the die.
|
|
|
|
|
|
|
|
|
|
|
|
|
Redding Reloading 86182 357 Magnum Profile Crimp Die
|
List Price: $33.90
Our Price: $33.14
You Save $0.76!
|
|
|
For handgun cartridges which do not headspace on the case mouth. These dies are not for everyone!-They were designed for those who want the best possible crimp. Profile crimp dies provide a tighter, more uniform roll type crimp, and requires the bullet to be seated to the correct depth in a previous operation.
|
|
|
|
|
|
|
|
|
|
|
|
|
Redding Reloading 84120 25-06 Remington Deluxe Die Set
|
List Price: $91.50
Our Price: $58.60
You Save $32.90!
|
|
|
Deluxe die sets for bottleneck cases contain three dies. The full length resizing die contains a decapping rod assembly with a neck expander. The seating die includes bullet guide, built-in crimping ring and the proper seating plug. Also includes a neck sizing die.
Contains:
- Full length sizing die
- Seating Die
- Neck Sizing Die
- Decap rod assembly
- Size button
|
|
|
|
|
|
|
|
|
|
|
|
|
Redding Reloading 93186 44 Magnum Expander Die
|
List Price: $21.90
Our Price: $24.55
|
|
|
The expander die contains a neck expanding plug.
|
|
|
|
|
|
|
|
|
|
|
|
|
RCBS 11103 Series A Small-Base Die .223
|
|
Our Price: $45.76
|
|
|
The classic dies that started it all continue to set industry standards. RCBS Precision dies are RCBS Precisioneered to deliver superior performance plus easy adjustment and operation, whether you reload 10 or 10,000 cartridges a year.
.223
Sets Feature:
Sizing dies with tolerance twice as stringent as typical firearms and ammunition for consistent chambering round after round.
Fine body knurling for easy, non-slip adjustment
Hardened die bodies
Easy, adjustable expander-decapping unit locks in place, eliminating slippage
Three-piece expander/decapping unit lets you replace the decapping pin in a snap
|
|
|
|
|
|
|
|
|
|
|
|
|
Redding Reloading 81146 30-30 Winchester Neck Sizing Die
|
List Price: $42.60
Our Price: $38.19
You Save $4.41!
|
|
