|
|
|
|
|
|
Hornady 044095 LNL Press Conversion Bushing
|
Our Price: $13.48
|
|
|
This easy to install adapter works in RCBS Rock Chucker and other reloading presses using a 1 1/4 -12 thread. Simply insert in place and you're ready to Lock-N-Load.
|
|
|
|
|
|
|
|
|
|
|
|
|
Redding Reloading 86208 458 Win Mag Profile Crimp Die
|
List Price: $38.40
Our Price: $34.52
You Save $3.88!
|
|
|
For handgun cartridges which do not headspace on the case mouth. These dies are not for everyone!-They were designed for those who want the best possible crimp. Profile crimp dies provide a tighter, more uniform roll type crimp, and requires the bullet to be seated to the correct depth in a previous operation.
|
|
|
|
|
|
|
|
|
|
|
|
|
Hornady 044090 MicroJust Seating Stem
|
|
Our Price: $33.11
|
|
|
You can add the Hornady MicroJust Seating Stem to any New Dimension seating die. Now there's no need to buy an expensive calibrated seating die. The Hornady MicroJust micrometer-style Seating Stem is the economical way to achieve optimum bullet seating depth for benchrest accuracy and consistency. Simply replace the standard seating depth adjustment stem with the MicroJust Seating Stem. The MicroJust stem allows you to precisely set bullet seating depth in .001 of an inch increments. All-steel construction.
|
|
|
|
|
|
|
|
|
|
|
|
|
RCBS 99244 Shell Holder #44
|
|
Our Price: $11.28
|
|
|
If your shell holder doesn't securely grip the sell and firmly fit into the press during reloading, you're bound to have headspace and sizing problems. RCBS manufactures their shell holders to the industry's tightest tolerances, using only the finest steel.
#44 Shellholder fits:
500 Smith & Wesson
|
|
|
|
|
|
|
|
|
|
|
|
|
Redding Reloading 13000 Powder Funnel
|
|
Our Price: $9.89
|
|
|
Nearly indestructible, super-tough Lexan. Fits all cartridge cases from .22 to .45 caliber. Antistatic prevents powder from sticking.
|
|
|
|
|
|
|
|
|
|
|
|
|
Redding Reloading 18000 Case Preparation Kit
|
|
Our Price: $31.93
|
|
|
All the tools you need in one package for removing dirt and powder residue from the inside of case necks and primer pockets. Kit comes complete with accessory handle, large and small primer pocket cleaners and three case neck brushes to handle all cartridges from .22 thru .45 caliber.
|
|
|
|
|
|
|
|
|
|
|
|
|
Hornady 480040 Universal Reloading Block
|
|
Our Price: $9.91
|
|
|
Two different sides combine to hold 50 cases from 32 ACP through 458 Magnum.
|
|
|
|
|
|
|
|
|
|
|
|
|
Hornady 060008 Decapping Pin-Large 6-pk
|
|
Our Price: $8.69
|
|
|
The replaceable headed decap pin is specially machined from hardened select steel.
|
|
|
|
|
|
|
|
|
|
|
|
|
Redding Reloading 21000 Original Formula Case Lube
|
|
Our Price: $9.70
|
|
|
Packaged in 2 oz plastic squeeze bottle. Formulated for tough resizing and forming operations. Prolongs the life of your dies and simplifies reforming. There is a difference in case lubes.
|
|
|
|
|
|
|
|
|
|
|
|
|
Redding Reloading 21022 Redding/Imperial Sizing Die Wax
|
|
Our Price: $9.50
|
|
|
The original non-liquid sizing die lube. Packaged in 1 oz tins.
|
|
|
|
|
|
|
|
|
|
|
|
|
RCBS 90375 Trim Mate Case Prep Center 110VAC
|
List Price: $144.95
Our Price: $131.27
You Save $13.68!
|
|
|
Case preparation just became five times easier and faster with the Trim Mate Case Prep Center. Five gear-driven rotating heads turn the tedious task of chamfering, deburring, primer pocket cleaning, military crimp removal and flash hole deburring into child's play. The tough, high-torque motor does all the work, allowing you quick case movement from station to station. There are also two stationary positions for case neck brushes or other useful accessories and a cupped area for securing dry case neck lube. The Trim Mate Case Prep Center includes large and small primer pocket brushes, inside chamfering and outside deburring tools, medium and small case neck brushes and a packet of dry case neck lube.
|
|
|
|
|
|
|
|
|
|
|
|
|
RCBS 09202 Shell Holder #2
|
|
Our Price: $11.28
|
|
|
If your shell holder doesn't securely grip the sell and firmly fit into the press during reloading, you're bound to have headspace and sizing problems. RCBS manufactures their shell holders to the industry's tightest tolerances, using only the finest steel.
#2 Shellholder fits:
22 Savage High Power
25-35 Winchester
6.5mm x 55 Swedish Mauser
7-30 Waters
307 Winchester
7.5mm x 55 Schmidt-Rubin
7.7mm x 58 Japanese Arisaka
32 Winchester Special
32-40 Winchester
356 Winchester
375 Winchester
38-55 Winchester & Ballard
|
|
|
|
|
|
|
|
|
|
|
|
|
RCBS 09206 Shell Holder #6
|
|
Our Price: $11.28
|
|
|
If your shell holder doesn't securely grip the sell and firmly fit into the press during reloading, you're bound to have headspace and sizing problems. RCBS manufactures their shell holders to the industry's tightest tolerances, using only the finest steel.
#6 Shellholder fits:
22 Remington Jet
5.6mm x 50 Rimmed
256 Winchester Magnum
357 Magnum
357 Remington Maximum
38 Smith & Wesson
38 Special
|
|
|
|
|
|
|
|
|
|
|
|
|
Redding Reloading 80191 45 Colt/454 Casull Three Die Set
|
List Price: $57.00
Our Price: $45.10
You Save $11.90!
|
|
|
Die sets for straight wall cases contain three dies. This is necessary because it is not possible to full length resize straight wall cases and expand the neck for proper bullet fit in one operation. The full length resizing die contains a decapping rod assembly. The expander die contains a neck expanding plug. The seating die includes bullet guide, built-in crimping ring and the proper seating plug. Seating die comes with roll crimp.
|
|
|
|
|
|
|
|
|
|
|
|
|
Redding Reloading 80243 7.65MM x 53 Mauser FL Die Set
|
List Price: $114.60
Our Price: $78.92
You Save $35.68!
|
|
|
Redding Series C 2-Die Sets (7.65mmx53 Mauser; Belgian) - #80243
Full length die sets for bottleneck cases contain two dies. The full length resizing die contains a decapping rod assembly with a neck expander. The seating die includes bullet guide, built-in crimping ring and the proper seating plug.
Contains:
- Full length sizing die (#91243)
- Seating Die (#92243)
- Decap rod assembly (#23310)
- Size button (#41310)
|
|
|
|
|
|
|
|
|
|
|
|
|
Redding Reloading 80415 6.5MM/284 Win Full Length Die Set
|
List Price: $78.00
Our Price: $60.08
You Save $17.92!
|
|
|
Redding Series D 2-Die Sets (6.5mm/284 Winchester) - #80415
Full length die sets for bottleneck cases contain two dies. The full length resizing die contains a decapping rod assembly with a neck expander. The seating die includes bullet guide, built-in crimping ring and the proper seating plug.
Contains:
- Full length sizing die (#91415)
- Seating Die (#92415)
- Decap rod assembly (#34263)
- Size button (#42263)
|
|
|
|
|
|
|
|
|
|
|
|
|
Redding Reloading 84141 284 Winchester Deluxe Die Set
|
List Price: $124.50
Our Price: $88.60
You Save $35.90!
|
|
|
Deluxe die sets for bottleneck cases contain three dies. The full length resizing die contains a decapping rod assembly with a neck expander. The seating die includes bullet guide, built-in crimping ring and the proper seating plug. Also includes a neck sizing die.
Contains:
- Full length sizing die
- Seating Die
- Neck Sizing Die
- Decap rod assembly
- Size button
|
|
|
|
|
|
|
|
|
|
|
|
|
Redding Reloading 84155 308 Win/307 Win Deluxe Die Set
|
List Price: $91.50
Our Price: $68.87
You Save $22.63!
|
|
|
Deluxe die sets for bottleneck cases contain three dies. The full length resizing die contains a decapping rod assembly with a neck expander. The seating die includes bullet guide, built-in crimping ring and the proper seating plug. Also includes a neck sizing die.
Contains:
- Full length sizing die
- Seating Die
- Neck Sizing Die
- Decap rod assembly
- Size button
|
|
|
|
|
|
|
|
|
|
|
|
|
Hornady 050090 Kinetic Bullet Puller
|
|
Our Price: $34.43
|
|
|
Kinetic Bullet Puller.
Easy to use. Removes bullets from cartridges without damaging the bullets. The hollow head captures the bullet and powder for reuse. Can be used on any rifle and pistol cartridges up to 45 caliber.
|
|
|
|
|
|
|
|
|
|
|
|
|
Redding Reloading 67000 T-7 Turret Reloading Press
|
List Price: $369.00
Our Price: $273.24
You Save $95.76!
|
|
|
The T-7 combines strength, power and convenience with the speed and versatility of a turret press.
The design criteria was to create the ultimate turret press. The engineering team started with the time proven cast iron construction and turret support that is second to none. They added powerful compound linkage with over 3.8" of ram travel. A 1" diameter hollow ram was chosen with the "smart" primer arm and primer collection system borrowed from the Ultramag. Another station was added to the turret for even greater versatility and an optional "Slide Bar Automatic Primer Feeding System" was designed.
Features:
- Seven station turret head
- Heavy-duty cast iron frame for strength and wear resistance
- Powerful compound linkage with positive ram stop
- 1" diameter ram
- 4 3/4" press opening
- 3 11/16" ram stroke
- Tubular spent primer collection system
- Ball handle
- Accepts all standard 7/8" - 14 threaded dies and universal shell holders
- Shellholders may be rotated to any comfortable position desired
- "Smart" primer arm for seating small and large primers
- Interchangeable turret heads
- Competition die compatible
|
|
|
|
|
|
|
|
|
|
|
|
|
Redding Reloading 84223 300 WSM Deluxe Die Set
|
List Price: $91.50
Our Price: $68.87
You Save $22.63!
|
|
|
Deluxe die sets for bottleneck cases contain three dies. The full length resizing die contains a decapping rod assembly with a neck expander. The seating die includes bullet guide, built-in crimping ring and the proper seating plug. Also includes a neck sizing die.
Contains:
- Full length sizing die
- Seating Die
- Neck Sizing Die
- Decap rod assembly
- Size button
|
|
|
|
|
|
|
|
|
|
|
|
|
Stoney Point 041113 "A" Modified Case 6mm Rem
|
|
Our Price: $9.09
|
|
|
To use Stoney Point's O.A.L. Gauge, you will need to purchase a Modified Case to fit your firearm's chamber and thread it onto the Gauge. These specially prepared Modified Cases are threaded at the case-head and have a .002" oversized neck to accept the same bullets you intend to load. This is critical as the O.A.L. Gauge dimensions obtained will be accurate to .001". Results such as this cannot be attained with competitive products which use a simulated bullet with an arbitrary shape.
|
|
|
|
|
|
|
|
|
|
|
|
|
Stoney Point 042059 Comparator Insert .257
|
|
Our Price: $7.95
|
|
|
The Bullet Comparator easily attaches to the blade of your caliper with a thumbscrew and uses these interchangeable insert bushings to measure from the bullet ogive.
|
|
|
|
|
|
|
|
|
|
|
|
|
Redding Reloading 55155 308 Win Competition Seating Die
|
List Price: $132.00
Our Price: $100.74
You Save $31.26!
|
|
|
The Redding Competition Seating Die has quickly established itself as the "state of the art" in straight line bullet seaters. This designed has beat the concentricity problems inherent in all other seating dies of this type. Tighter manufacturing tolerances have been made possible due to the details of the patented seating stem system. The bullet guide to seating stem fit is so precise that the seating stem can actually be demonstrated to "float" on a column of air.
The seating stem is precision ground to exactly match bullet diameter. No seating die on the market is built to this level of precision. Alignment and accuracy are enhanced by the cartridge case and bullet being completely supported and aligned in a close fitting, precision ground sleeve before the bullet seating begins. The micrometer is calibrated in .001" increments for precise seating depth and is infinitely adjustable (without clicks). The micrometer also has a "zero" set feature that allows you to zero the micrometer to your rifle or favorite seating depth.
|
|
|
|
|
|
|
|
|
|
|
|
|
Hornady 050100 Powder Trickler
|
|
Our Price: $14.44
|
|
|
The ideal powder scale companion. Just turn the knob and powder slowly trickles out into your scale pan to help you measure exact charges.
|
|
|
|
|
|
|
|
|
|
|
|
|
Hornady 190184 Powder Charge Bushing- 256
|
|
Our Price: $8.89
|
|
|
For all Hornady loaders. Designed so shot and powder bushings cannot be accidently reversed in the charge bar. Made for both powder and shot, these bushings let you easily change from one load to another. Nonferrous metal assures spark-free operation.
|
|
|
|
|
|
|
|
|
|
|
|
|
Hornady 586050 Powder Funnel 22-45
|
|
Our Price: $7.86
|
|
|
Fits all cartridges from 22 to 45 caliber. Anti-static treatment eliminates powder sticking. Tapered-tube design reduces powder spills.
|
|
|
|
|
|
|
|
|
|
|
|
|
Hornady 480025 Shot/Powder Baffles/2
|
List Price: $13.00
Our Price: $11.82
You Save $1.18!
|
|
|
Set of two baffles is included on the 366 Auto Shotshell Reloader.
|
|
|
|
|
|
|
|
|
|
|
|
|
RCBS 09207 Shell Holder #7
|
|
Our Price: $11.28
|
|
|
If your shell holder doesn't securely grip the sell and firmly fit into the press during reloading, you're bound to have headspace and sizing problems. RCBS manufactures their shell holders to the industry's tightest tolerances, using only the finest steel.
#7 Shellholder fits:
30-40 Krag
303 British
#8 Shellholder fits:
45 Auto Rim
|
|
|
|
|
|
|
|
|
|
|
|
|
Hornady 290013 Pistol Powder Bushing #8
|
|
Our Price: $9.56
|
|
|
How to select bushings for half-grain charges: Hornady powder bushings are identified by numbers that correspond to the size of their inside diameter. Bushings for powder charges in half-grain increments can be calculated from this chart. Simply "split the difference" between the two even-grain bushings, and select the bushing nearest the result. Example: To find the bushing for 18 1/2 grains of Hercules Red Dot powder, note that bushing #468 gives a charge of 18 grains and that bushing #480 gives 19 grains. Split the difference between 468 and 480, and the result is 474. Thus, the correct bushing for 18 1/2 grains of Red Dot is bushing #474. IMPORTANT: Due to agitation of powder during the loading operation, different models of loaders require different bushings. Therefore this chart should be used only for 366 Auto and Hornady's APEX. All charges listed on this chart are an average of several loads, weighed following the complete reloading cycle. Powders used in establishing these loads were from ballistic samples supplied by the manufacturer or sealed tins of recent manufacture. Charges may vary slightly due to operator's technique and/or powder variables.
Pistol Powder Measure Bushing Chart
Bushing Size #8:
Accurate Arms #2 - 5.8
Accurate Arms #5 - 7.4
Accurate Arms #7 - 7.5
Accurate Arms #9 - 7.5
Alliant Powder Pistol - 5.5
DuPont 700X - 3.5
DuPont 4227 - na
DuPont SR 7625 - 4.1
DuPont SR 4756 - na
DuPont PB - 3.3
Bullseye - 4.4
Hercules 2400 - na
Hercules Red Dot - 3.2
Hercules Unique - 4.5
Hercules Herco - 3.8
Hercules Blue Dot - na
Hodgdon HP-38 - 5.0
Hodgdon HS-6 - 7.4
Hodgdon HS-7 - 7.3
Hodgdon H110 - 7.4
Hodgdon H4227 - 6.6
Hodgdon Clays - 3.3
Hodgdon Clays International - 3.7
Hodgdon Clays Universal - 4.4
Winchester 231 - 5.3
Winchester 296 - na
Winchester Wap - 6.1
|
|
|
|
|
|
|
|
|
|
|
|
|
Hornady 390547 Shell Holder- #7
|
|
Our Price: $8.73
|
|
|
Only Hornady shell holders are precision machined from solid steel and then heat treated to perform flawlessly for the life of the press. They also fit on most other brands.
Fits:
#1 - 5.6x57; 22/250; 240 Wby; 243 Win; 244/6mm; 6mm Int; 6mm/284; 6mm BR; 250 Savage; 25/06; 257 Roberts; 25/284; 6.5/06; 6.5x57; 270 Win; 7x57(7mm Mauser); 7mm/08; 7mm Rem BR; 7x64; 7mm Express/280; 284 Win; 300 Savage; 308 Win; 30/06; 7.7 Jap; 8mm Mauser; 8mm/06; 8x60S; 35 Whelen; 358 Win; 9.3x57; 9.3x62; 44 Auto Mag; 45ACP/WM
#2 - 219 Zipper; 5.6x52R; 22 Savage HP; 25/35 Win; 30/30 Win; 30 Herrett; 32 Win Spl; 8.15x46R; 357 Herrett; 375 Win; 7x30 Waters; 32/40
#3 - 22 Hornet; 22-K Hornet
#4 - 220 Swift; 225 Win; 7mm Merrill
#5 - 257 Wby; 6.5 Rem Mag; 264 Win Mag; 270 Wby; 7mm Rem Mag; 7mm Wby; 300 H&H; 300 Win Mag; 300 Wby; 300 Rem Ultra Mag; 5308 Norma Mag; 8mm Rem Mag; 338 Win Mag; 340 Wby; 350 Rem Mag; 358 Norma Mag; 375 H&H; 416 Rem Mag; 458 Win; 450 Marlin
#6 - 22 PPC; 22 RCFM-Jet; 256 Win; 6mm PPC; 7.62x39; 38/357/357 Max
#7 - 218 Bee; 25/20 Win; 32/20 Win
#8 - 30 Luger; 9mm Luger; 9x21; 38 Super Auto
#9 - 38/40 Win; 44/40 Win
#10 - 10mm Auto; 40 S&W
#11 - 30/40 Krag; 303 British
#12 - 25 Rem
#13 - 7x65R; 9.3x74R
#14 - 33 Win; 378 Wby; 416 Wby; 45/70 Govt; 460 Wby; 475 Linebaugh
#15 - 376 Steyr
#16 - 17 Rem; 17/222; 17/223; 221 Rem; 222 Rem; 222 Rem Mag; 5.6x50 Mag; 223 Rem; 6mm/223; 6x47 Rem; 6.5mm TCU; 7mm TCU; 7mm/223 Ingram; 7x47 Helm; 380 Auto; 6mm TCU
#17 - 224 Wby
#19 - 6.5x55
#20 - 6.5 Mann.
#21 - 6.5 Carc; 7.35 Carc
#22 - 30 M1 Carbine; 32 ACP
#23 - 7.62 Russian
#24 - 7.65 Belgian
#25 - 348 Win; 10.3x60
#26 - 35 Rem
#27 - 375 JDJ; 444 Marlin
#28 - 38 S&W
#29 - 41 Mag
#30 - 6.5x68; 7.5 Swiss; 8x68S; 357/44 B&D; 44 Spl/44 Mag
#31 - 45 Auto Rim
#32 - 45 Long Colt; 454 Casull
#33 - 303 Savage; 307 Win; 356 Win
#34 - 6.5 Jap
#35 - 7x61 S&H
#36 - 32 S&W Lg/Short H&R
#37 - 25 ACP
#38 - 416 Rigby
#40 - 50 AE
|
|
|
|
|
|
|
|
|
|
|
|
|
Hornady 390550 Shell Holder- #10
|
|
Our Price: $8.73
|
|
|
Only Hornady shell holders are precision machined from solid steel and then heat treated to perform flawlessly for the life of the press. They also fit on most other brands.
Fits:
#1 - 5.6x57; 22/250; 240 Wby; 243 Win; 244/6mm; 6mm Int; 6mm/284; 6mm BR; 250 Savage; 25/06; 257 Roberts; 25/284; 6.5/06; 6.5x57; 270 Win; 7x57(7mm Mauser); 7mm/08; 7mm Rem BR; 7x64; 7mm Express/280; 284 Win; 300 Savage; 308 Win; 30/06; 7.7 Jap; 8mm Mauser; 8mm/06; 8x60S; 35 Whelen; 358 Win; 9.3x57; 9.3x62; 44 Auto Mag; 45ACP/WM
#2 - 219 Zipper; 5.6x52R; 22 Savage HP; 25/35 Win; 30/30 Win; 30 Herrett; 32 Win Spl; 8.15x46R; 357 Herrett; 375 Win; 7x30 Waters; 32/40
#3 - 22 Hornet; 22-K Hornet
#4 - 220 Swift; 225 Win; 7mm Merrill
#5 - 257 Wby; 6.5 Rem Mag; 264 Win Mag; 270 Wby; 7mm Rem Mag; 7mm Wby; 300 H&H; 300 Win Mag; 300 Wby; 300 Rem Ultra Mag; 5308 Norma Mag; 8mm Rem Mag; 338 Win Mag; 340 Wby; 350 Rem Mag; 358 Norma Mag; 375 H&H; 416 Rem Mag; 458 Win; 450 Marlin
#6 - 22 PPC; 22 RCFM-Jet; 256 Win; 6mm PPC; 7.62x39; 38/357/357 Max
#7 - 218 Bee; 25/20 Win; 32/20 Win
#8 - 30 Luger; 9mm Luger; 9x21; 38 Super Auto
#9 - 38/40 Win; 44/40 Win
#10 - 10mm Auto; 40 S&W
#11 - 30/40 Krag; 303 British
#12 - 25 Rem
#13 - 7x65R; 9.3x74R
#14 - 33 Win; 378 Wby; 416 Wby; 45/70 Govt; 460 Wby; 475 Linebaugh
#15 - 376 Steyr
#16 - 17 Rem; 17/222; 17/223; 221 Rem; 222 Rem; 222 Rem Mag; 5.6x50 Mag; 223 Rem; 6mm/223; 6x47 Rem; 6.5mm TCU; 7mm TCU; 7mm/223 Ingram; 7x47 Helm; 380 Auto; 6mm TCU
#17 - 224 Wby
#19 - 6.5x55
#20 - 6.5 Mann.
#21 - 6.5 Carc; 7.35 Carc
#22 - 30 M1 Carbine; 32 ACP
#23 - 7.62 Russian
#24 - 7.65 Belgian
#25 - 348 Win; 10.3x60
#26 - 35 Rem
#27 - 375 JDJ; 444 Marlin
#28 - 38 S&W
#29 - 41 Mag
#30 - 6.5x68; 7.5 Swiss; 8x68S; 357/44 B&D; 44 Spl/44 Mag
#31 - 45 Auto Rim
#32 - 45 Long Colt; 454 Casull
#33 - 303 Savage; 307 Win; 356 Win
#34 - 6.5 Jap
#35 - 7x61 S&H
#36 - 32 S&W Lg/Short H&R
#37 - 25 ACP
#38 - 416 Rigby
#40 - 50 AE
|
|
|
|
|
|
|
|
|
|
|
|
|
|
